Firmware Release Descriptions

Release 8.4.2 - 2018-12-20

IMPORTANT

  • This firmware release consist of the latest firmware version for each of the mentioned units and can be used to upgrade units in a MXC Microflex Conference System and in a DCS 6000 or DDS 5900 system using DIS CCU, CU 5905, CU 6105, CU 6110 Central Units.
  • Systems using CU 6000, CU 6005, CU 6010 and CU 6011 Central Units are not supported in this release.
  • To upload the firmware the FUU Firmware Upgrade Utility, which is part of this firmware release, must be used.

NEW FEATURES

  • DIS-CCU (6000 mode), CU 61xx:
    • Native support for Microflex Complete units: MXC640, MXCMIU, MXCIC and MXCSIGN
    • Support for setting GUI language in MXC640
    • Updated GUI labels to match MXCW
    • MXCSIGN setup screen included in the GUI to clear, identify and post names to the signs
  • MXC Units:
    • DCS LAN Redundant Loop configuration is now supported in the MXC units (using MXC-ACC-RIB unit)
    • Speak Button Lock supported
  • The FUU_Firmware_Upgrade utility renamed to MXC_Firmware_Upgrade_Utility

NOT SUPPORTED IN MXC UNITS

  • System
    • VOX mode
    • Dual mode
    • Shared microphone mode
  • MXC640
    • Start/stop meeting
    • Speech time
    • Messaging
    • System clock
  • MXCIC
    • Speak lists
    • Agenda
    • Messaging
    • Slow button
  • MXCMIU
    • XLR input
    • HDMI input 2

KNOWN BUGS

  • Vote result labels in TCP/IP control strings are shifted when the system uses SW6000
  • Spike on analog out on CCU during boot up
  • MXC640
    • Reply/request list is responding slow with more than 50/50 in the respective lists
    • Scrolling agenda with 100+ items is slow
    • When an agenda with max. items and with max. words in item name and descriptions is received the GUI is non-responsive for a period of time
    • Manual entered voting results are not shown if a voting has not been started previously
    • The agenda subject name for a manual entered result may be wrong if the participant has not closed the voting result screen after the last voting session
    • 'Rep on' and 'Rep off ' buttons missing in the UI with chairman left button configured to 'Reply'

BUG FIXES

  • DIS-CCU: Exclusive Functionality does not switch a shared slave microphone back on when removed
  • No audio from shared mic (slave) after un-mute

Release 8.3.1 - 2018-06-14

IMPORTANT

  • This firmware release can be used to upgrade units in a DDS 5900 or a DCS 6000 systems using CU 5905, CU 6105, CU 6110 or DIS CCU Central Units.
  • The CU 6000, CU 6005, CU 6010 and CU 6011 Central Units are not supported in this release.
  • The DIS FUU Firmware Upgrade Utility, which is part of this firmware release, must be used when upgrading

NEW FEATURES

  • DIS-CCU (6000 mode), CU61xx:
    • Support for Microflex Complete units: MXC615, MXC620, MXC620-F, MXC630, MXC630-F 
  • MXC Units:
    • DCS LAN Point-to-Point communication in daisy chain configuration (MXC units can be used in a combined setup with DCS 6000 units)
    • Support for dual cards (NFC/Chip) and using "Participant" name from NFC card in CU standalone 6000 mode
    • Function Button configuration 'on-the-fly', Mute button "Toggle" and "Press and hold" configuration
    • 3-letter abbreviations for channel languages in accordance with ISO 639-3

NOT SUPPORTED

  • VOX, Speak Button Lock, Dual-mode, DSC LAN Redundant Loop configuration is not supported in the MXC units

IMPROVEMENTS

  • DC69 handles Mic On incorrectly in Speak Mode with Reply
  • DC69 non-accumulating speech time - speech time is not reset on microphone
  • DC69 Some Delegate Names not displayed on Welcome screen)
  • DC69 incorrect exclusive functionality

Release 8.2.2 - 2017-11-23

IMPORTANT

  • This firmware release can be used to upgrade units in a DDS 5900 or a DCS 6000 systems using CU 5905, CU 6105, CU 6110 or DIS CCU Central Units.
  • The CU 6000, CU 6005, CU 6010 and CU 6011 Central Units are not supported in this release.
  • The DIS FUU Firmware Upgrade Utility, which is part of this firmware release, must be used when upgrading

NEW FEATURES

  • CU/CCU - WEB-UI, Namesign multi language labels added
  • CU 5905/CCU(5900 mode) - Added support for TPCI mic attenuation command

IMPROVEMENTS

  • CU/CCU - Ensure channel selectors get language abbreviation on/off setting repeatedly.
  • SW6000, CU - Fixed clearing request list, individual request Off comes before Clear Request List
  • CU/CCU - Fixed CU responds with Mic on, when sending microphone on message to a Interpreter that is not connected to the CU
  • CU/CCU - CU is no longer resetting if interpreter settings are reset while the interpreter microphone is active
  • CU/CCU - WEB-UI 'View Open Source Licenses’ now show open source licenses instead of a '404 Not Found' html page
  • CS6340F - After CU start-up, channel OLED on CS6340F now correctly show channel language abbreviation instead of channel number
  • IS6132 - No longer audible difference in sound level on CU audio output, comparing floor sound and interpreted audio
  • SW6000, Interpreter, CU61xx, - Interpreter status is now correctly marked as 'Lost' if unregistered instead of 'Not Lost' leading to wrong status in SW6000
  • DC59xx - Fixed "All delegate off" LED is not ON when button is pressed on DC59xx chairman units
  • CU/CCU - In operation mode FIFO, the request list is now restored to speak list clicking 'All del off' button in WEB-UI

Release 8.2.1 - 2017-10-17

This firmware release has been recalled and users are advised to upgrade to release 8.2.2.

Release 8.2 - 2017-03-31

This release contains the following new features:

IMPORTANT

  • This firmware release can be used to upgrade units in a DDS 5900 or a DCS 6000 systems using CU 5905, CU 6105, CU 6110 or DIS CCU Central Units.
  • The CU 6000, CU 6005, CU 6010 and CU 6011 Central Units are not supported in this release.
  • The DIS FUU Firmware Upgrade Utility, which is part of this firmware release, must be used when upgrading

NEW FEATURES
  • Support of Shure Name Sign
  • Support for individual microphone attenuation control in 5900 mode on the CU/CCU GUI

Release 8.0.6 - 2016-11-17

This release contains the following improvements:

IMPROVEMENTS

  • CU5905, CU61xx, CCU - Fixed an implementation that caused the CU to postpone storing of setup parameters due to high loads in VOX mode. The CU will now always store parameters after around 30 seconds even though under high load
  • CU5905, CU61xx, CCU - The CU hostname in the WEB page footer will now update immediately upon a change
  • CU5905, CU61xx, CCU - Fixed a bug that caused setting Audio In -> Loudspeaker from the CU front panel not being reflected the CU web interface
  • CU5905, CU61xx, CCU - The CU does now not accept an illegal subnet address
  • CU5905, CU61xx, CCU - The CU now accepts an empty gateway address
  • DC6990 - Fixed a bug that could cause a long delay in updating names in the speak list on the DC6990 display if a name was changed during a conference e.g. when using a podium microphone

Release 8.0.5 - 2016-10-18

This release contains the following new features and improvements:

NEW FEATURES

  • DC6990P - Support for colours on voting buttons
  • 6000, 5900 - Support for "Speak Button Lock". Settings available from CU5905/CU6110/CCU web interface. The ‘Lock Override Time (Long Push Time)’ and the ‘Lock Duration’ is settable from the web interface.
  • 6000, 5900 - Support for "Allow Mic Off". Settings available from CU5905/CU6110/CCU web interface
  • DC6990, DC6190, DM6680, DC59xx - Support for "Long Push" to overrule Speak Button Lock


IMPROVEMENTS

  • CU5905/CU6110/CCU – Audio In Volume, Level & Muted settings were not stored correctly in CU configuration. Making changes to Audio In 1 caused changes to be used for Audio In 2 after next reboot and vice versa
  • CU61xx, CCU - Electrical clicking noise removed from interpreter microphone LED when microphone is activated
  • CU5905/CU6110/CCU – Setting Audio In2 -> Loudspeaker from front plate does not work
  • CU61xx, CCU - Setting an Interpreter Unit to same A and B outgoing channel will cause audio to become lost if interpreter switch outgoing channel between A and B with Interpreter Unit engaged
  • PCB6000 (Flush mounted units) - Vote LED indication not correctly updated on chip card login during voting session if user has voted previously in the same session
  • DC6990P – Speech time not stopped on delegates during Exclusive On
  • DC6990P – Seat names not updated correctly on unit type change


FUU – FIRMWARE UPGRADE UTILITY


A new FUU version is released, v1489:

  • An issue in FUU was fixed where units with old firmware were cleared on a CU6010 when they became locked - hereby preventing an upgrade. (CONFFW-558)
  • Timestamps added to Upgrade Log.
  • FUU will now by default look for a FUU library in a the released folder structure.

Release 8.0.4 - 2016-04-05

This release contains the following new features and improvements:

NEW FEATURES

  • AIBox_59F –Audio Input Box based on DC59xxF Hardware released for custom project – can only be used in 6000 systems mode.
  • CU61xx, CCU - Support for customised Audio Input Box unit


IMPROVEMENTS

  • CU5905, CCU - Fixed bug where it is not possible to turn off unit type change in the web interface.
  • CU61xx, CCU - CU should not clear units that are locked and become lost. Can cause units not to be upgraded
  • CU61xx, CCU - Audio missing when one Mic in a link interrupts the other
  • CU61xx, CCU - Units sharing a microphone fail turning on in CAA microphone scan

Release 8.0.3 - 2016-02-24 (revised 2016-03-15)

This release contains the following new features and improvements:


PRODUCTS

This firmware release can be used to upgrade units in a DDS 5900 or a DCS 6000 system. To upload the firmware the DIS FUU Firmware Upgrade Utility must be used, which is part of this firmware release.


NEW FEATURES

  • DC6990P - Better indication in UI when message is received
  • DC6990P - Audio controls can be accessed on welcome screen when user is not logged in during a conference


IMPROVEMENTS

  • CU 61XX- Missing seat state on external control interface on user logout
  • CU 5905/CU 61XX - Improved sorting in web interface
  • CU 5905/CU 61XX - Several WEB UI enhancements
  • CU 61XX - Fixed that DC6990P units cannot vote if a conference is restarted shortly after stopping it when using chip card login
  • DC59xx - Improved audio handling during network errors

Release 8.0.1 - 2016-02-01

This release contains the following new features and improvements:


PRODUCTS

This firmware release can be used to upgrade units in a DDS 5900 or a DCS 6000 system. To upload the firmware the DIS FUU Firmware Upgrade Utility, which is part of this firmware release, must be used.

Important: Firmware Release 8.0.1 does not contain any update to CU 6005/CU 6010 or CU 6011. If the default free features has to be applied to those units a new feature license must be uploaded to the unit.


NEW FEATURES

  • Support for disabling/enabling of scrambling in CU 61XX through FUU
  • General Updates in the CU 5905/CU 61XX WEB interface
  • Support for DIS-CCU
  • Support for three login modes in the CU 5905/CU 61XX WEB interface (Admin, Chairman and Display options)
  • Support for new feature license with 6000 options:
  • Voting and VOX is now default features.
  • Interpreter channels can now be 4, 8, 16 or 31
  • Number of supported units can now be below 250 or above 250 (3800 is the maximum limit)
  • Support for display dimming when CU 5905/CU 61XX is idle
  • Support for sending group messages from SW 6000 (not available for CU 6005/CU 6010 or CU 6011)


IMPROVEMENTS

  • CU 5905/CU 61XX - VOX sensitivity parameters below -5 and above 5 are now accepted
  • CU 61XX - Missing and garbage information on external control interface when CUI is connected
  • CU 61XX - Bug in agenda item order when changing short descriptions from SW 6000
  • CU 61XX - Fix for missing short description on first agenda point on DC 6990P
  • CU 61XX - Poll denied from units when SW6000 is connected/disconnected
  • CU 61XX - Fix of CU reset failure where CU keeps resetting
  • DC 6990P - Availability of "Start voting" and "Attendance check" not consistent on DC 6990P
  • DC 61XX, CS 6340 - Fix of language abbreviations

Release 7.5.10 - 2015-10-02 (Hotfix)

This release contains the following new features and improvements:


IMPROVEMENTS

  • DC6120P - fixed bug causing missing audio on DC6120 units

Release 7.5.9 - 2015-10-02

This release contains the following new features and improvements:

NEW FEATURES

  • Implemented latching facility of the Mute button on DC6190, DM6680 and DC6990 in VOX operation mode:
  • In VOX mode (the mute button work in latching mode):
    • When activating the Mute button the audio from the unit is muted, which is indicated by turning of the LED indication in the gooseneck microphone. The audio will be muted until the button is activated again.
    • Activating the mute button, when the unit is in off state will prevent the microphone from being turned on remotely or activated by voice as long as the mute button is activated.
  • In other modes (the mute button work in non-latching mode):
    • The audio from the unit is muted as long as the Mute button is depressed, which is indicated by turning of the LED indication in the gooseneck microphone. Releasing the button will restore the audio from the unit.



IMPROVEMENTS

  • DC6990P - fixed bug where pressing mute on a delegate unit caused loss of audio transmission (On CU60xx with DC 6990 only)
  • DC6990P - fixed bug where agenda item prefix was not shown in the agenda overview
  • DC6990P - fixed bug that could cause a unit reset when reading long messages during a conference
  • DC6990P - fixed bug in support for right alligned text in agenda view
  • DC6190P - fixed bug causing increased audio transmission delay in VOX operation mode
  • Firmware initiatives to improve audio robustness against EMC effects


NOTES

  • New FUU version 1391 released together with this firmware version. This version has better socket handling and upgrade stability

Release 7.5.8 - 2014-12-17

This release is a hotfix correcting the following bug:


NEW FEATURES

* (DC6990P) Units experience overflows during voting tests
* (DM6680P) Unwanted electrical clicking noise from units when pressing speak button
* (CU61xx) DC6990P dual units has been experienced "locked" or "registering" after CU reboot and registration
* (CU61xx) Update to polish labels in the web interface
* (CU6110) Update to allow the password for the CU WEB interface to be cleared
* (CU61xx) Update to allow a unit to stay in the reply list after microphone priority is set to zero from external control


Other:

* FUU update to be able to handle updates to CU's where the WEB interface is password protected

Release 7.5.7 - 2014-10-24

This release is a hotfix correcting the following bug:

* (IS 6132) Prevent unit from beeing unusable when doing a full upgrade


Release 7.5.6 - 2014-09-19

This release contains improvements for the following:

* DC6990P support for Dot origon chip cards is enabled
* Russian labels updated in WEB interface
* More informative text added after WEB interface upgrade is completed with success.
* FUU updated to display information before and after sd*card repartitioning
* FUU updated to powercycle units if they don't enter their bootloader correctly during upgrade


This release contains fixes for the following:


* (CU61xx) Static IP address may change after an amount of time
* (CU61xx) Missing audio in speakers and headphones whan ambient microphone is connected
* (DC6990P) Languages are not reset to standalone settings when CUI is disconnected
* (CU61xx) Disabling DC6990P languages not saved in CU database
* (DC6990P) AUTO OFF functionality does not work for speaker B on dual units
* (CU61xx) AO BOX parameters is not stored correctly CU database
* (DC6990P) Unit can become unable to mute loudspeaker when loudspeaker gain is set to 0dB / OFF
* (CU61xx) Second interface for dual delegate not read correctly from CU configuration
* (DC6190P) Interpreted headphone output is attenuated when speak is activated before channel selection is made
* (DM6680, DC6190P) Unit microphone can be switched OFF when "mute all" is pressed repeatedly from chairman
* (DC6990P, DC6190P) Headphone output diasbled below volume 6 when listening to floor and in speak
* (DC6990P) Mute button does not disable Larsen attenuation when in speak and listening to floor
* (DC6990P, DM6680) Microphone enters a muted state if mute is pressed while in speak and speak button is pressed again

Release 7.5.5 (hotfix) - 2014-06-24

This release is a hotfix correcting the following bug:

* This release is only available as FUU upgrade. No CU web interface update
* CU 61xx: Resets when external command are sent with unused seat numbers
* CU 61xx: Fixed a bug causing dual microphones not to be shown properly in status and speak list
* DC 6990 P: Enable DC69xxP units to display Georgian letters
* DC 6990 P: Fixed a bug that caused a reset in DC69xxP units when 8 microphones were shown in the speak list

Release 7.5.3 (hotfix) - 2014-04-29

This release is a hotfix correcting the following bug:

* The SD card may get corrupted if the unit is power cycled or power is removed while central unit is accessing the SD card during the boot up sequence.If the card is corrupted the Central Unit (CU 6105 and CU 6110) will not boot up when powered on
* Update to allow the CU to get an IP address if it's connected directly to a pc without dhcp.
* Auto Floor function now affects all outputs i.e. Analog Outputs,...

For details please refer to the Service Bulletin

Release 7.5.0 - 2014-01-10

This release introduces the following new features:

New functionality
* Reply functionality implemented in firmware for CU6110 and CU6105.
* Reply functionality implemented in firmware for DC6990P, DC61xxP and DM6680P.
* Basic reply functionality implemented in web interface.
* Introduced facility to downgrade the CU firmware.
* Added "mic_all_off" command to external protocol.
* Introduced control message for "AllRequestsOff".
* FUU update to handle unit left button configuration.

BUG fixes
* Fixed that loudspeaker control in the web interface affects external IS loudspeaker.
* Fixed that units cannot interrupt podium microphone
* Fixed CU reset or high loads after changing the order of agenda items.
* Fixed PCB6000 initial volume to be non-zero at start up.
* Fixed that FUU deletes wrong languages from DC69-units.
* Fixed that FUU opens wrong language file if the working folder also contains language file

Release 7.4.5 (hotfix) - 2013-12-03

This is a maintenance firmware release. This release has updates for CU 6105, CU 6110

The following changes/bug fixes are contained in this release:
* Introduced new command to empty the request queue

Release 7.4.4 (hotfix) - 2013-10-04

This is a maintenance firmware release. This release has updates for CU 6105, CU 6110, DC6990x rev A, B and C.

The following changes/bug fixes are contained in this release:
* Use priority to display ‘Chairman’ in web interface microphone control. Previously unit type was used for this purpose.
* Make it possible for CU to recover from a fatally corrupted configuration database.
* VOX is default enabled for CU 61xx when no license is installed. Must be default disabled.
* VOX functionality must be disabled in web interface and display, when no valid VOX license is installed.
* Unregistered microphones can be put into request list by operator.
* A muted microphone remains in speak list if the microphone is lost (disconnected).
* Fewer microphones than max speakers can be turned on.
* DC69xx does sometimes not registering on CU61xx Power On
* Changing seat numbers for microphones using the browser interface can make it impossible to change settings for these microphones –(priority/microphone attenuation/speaker attenuation).
* Changing microphone positions in the request list by an operator while the system is operating in FIFO mode can cause several units to erroneously report that they are the first in the request list. (Flashing REQ LED).

Release 7.4.3 (hotfix) - 2013-08-27

This version changes the support for cyrillic font in DC 6990 P. Previous the font ”liberation sans” was used for cyrillic, but as some letters are missing for supporting the language in Tajikistan, the font has been changed to ”freesans”.

Release 7.4.1 (hotfix) - 2013-07-03

Corrects and issue with scrolling in Speak and Request list in the Microphone Control web page

Release 7.4 - 2013-07-01

This release introduces the following new features:
*Showing of Speech Time limitation on DC 6990 P/F units with CU 6105/CU 6110 and SW 6000
*CU TCP/IP external protocol support voting control

Release 7.3 - 2013-04-15

This release introduces the following new features:
* 'Enable/Disable' buttom for 'DIS Digital Recorder' in CU 'Microphone Control' browser screen
* CU browser interface revised for easy configuration of system with large number of conference units
* All DCS 6000 voting units supports now 1 to 5 button voting
CU TCP/IP external protocol support for:
* showing of delegate name in 'mic_on' and 'mic_request_on' messages
* showing of seat state, which gives login name of a delegate who logs into the seat
* setting speak priority, individual speaker attenuation and individual microphone attenuation
* setting interrupt ability to CU 61xx. Options , ,
* setting 'Line In 1 / 2' gain and for adjusting 'Line In 2' level
* extensions for 'mic_status' to contain 'individual priority' and 'seat_state' with names of delegates logged into the seats
* extensions for 'audio_status' to contain 'individual microphone attenuation' and 'individual speaker attenuation'
* connection to 'DIS Digital Recorder'

Release 7.2.2 (hotfix) - 2013-01-16

Corrects an error where the FW on DC 6120 P didn't upgrade/install correct

Release 7.2.1 (hotfix) - 2013-01-03

Corrects an error where the CU 6105 resets when no connection to LAN network is present

Release 7.2.0 - 2012-12-21

Support for 1-5 voting buttons on DC 6990 P
Support for connection to all DCS LAN outputs on a CU 6110 for all units

Release 7.1.2 (hotfix) - 2012-11-30

Corrects a bug when changing seat numbers for units using the CU browser

Release 7.1.1 (hotfix) - 2012-11-24

Corrects a bug in the EEM (Emergency Evacuation Message) setup

Release 7.1.0 - 2012-11-22

Support for CU 6105 Central Unit - TCP/IP connection
Browser language selection in CU 6105 browser
Updated limiter settings on DC 6120 P, DC 6190 P, DC 6990 P & DM 6680 P

Release 6.8.9 - 2012-05-09

Interpretation abbreviation has been updated

Release 6.8.8 (hotfix) - 2012-03-05

In Central Unit correcting an error when assigning speaker stand microphone.

Release 6.8.7 (hotfix) - 2012-01-10

*Changes Mic on/off button functionality on DC 6120 P and DC 6190 P.
*Correct an DSP error in CU display. Error is only present in large systems.

Release 6.8.4 - 2011-11-05

This release introduces expansion of the features in the Voice activation mode in the DCS 6000 system :
This release is compatible with SW 6000 v5.5.56 and is not compatible with previous versions


The ability to Enable / Disable the “Book Drop” feature:

The “Book Drop” feature is the activation of a mic when a sound is picked up that is above the set threshold in VOX, but immediately releases because the audio source doesn’t continue for longer than 1 sec.
When the feature is “disabled”, the microphone activates when a sound is picked up and remain active for the time set within the “Release time” menu item.

Increase the “Threshold” range of activation:
Values: {-12, -11 to -3, -2, -1, 0,1,2,3 to 8}.

The ability to Enable / Disable “Last Mic On” feature:
This feature is a desired feature when using 3rd party DSPs.
When the feature is “Enabled”, operating in VOX mode, the last (& only) microphone will ignore the “Release time” and remain permanently active until another mic becomes active. At which time, the last mic will automatically deactivate.

Release 6.8.3a (hotfix) - 2011-05-04

This release includes FUU 2.12.0.1. The FUU version corrects an error in the FUU when setting the COM port.

Release 6.8.1 - 2011-03-14

This release introduces the following new features:
DC6990P:
Support for languages:
- Baharsa Indonesia
- Vietnamese
- Burmese
- Urdu
- Hindi
- Farsi
- Latin
- Cambodian
- Hebrew
FUU Firmware Upgrade Utility v2.10.0.1

This release addresses the following bugs:
The new version of the FUU corrects an error during upgrade, where the baud rate in the CU is set to 38.400.

SCR 4272 - DC6990P. Voting screen may disappear preventing delegates from voting. Various scenarios exist - e.g. a voting session is started while a delegate has entered the Audio dialogue of the DC69 - e.g. the delegate hits a menu button a fraction of a second after the start of voting session.

SCR 4229 - DC6990P. The text 'Voting started on subject' is always presented in English text - no translation is possible.
Also the text 'Voting Results on Subject' hasn't been enabled for translation.

SCR 4232 - DC6990P. DC69 remains in speak when priority is set to zero - it is subsequently not possible to switch off the microphone from the unit.

SCR 4222 - DC6990P. Aborting a unit firmware upgrade in the middle of the upgrade will cause the unit to incorrectly report that firmware is valid -
condition exists until next reboot of the unit.

SCR 4100 - DC6990P. If the application is erased, but not re-written, and the unit is reset into upgrade-mode, the unit will keep resetting.

Release 6.8 (hotfix) - 2010-11-22

This hotfix addresses the following problem:
Updates the firmware in DC 6190P for correcting a timing error in the display driver.

Release 6.7.2 (hotfix) - 2010-09-29

The hotfix addresses the following problem:
In a conference with chip card login, removal of chip card on one unit can cause another DC69 unit to turn off the microphone.

Release 6.7 - 2010-05-01

This release is compatible with SW 6000 v5.3.16

Release 6.6.2 (hotfix) - 2010-01-27

The release includes a single change - Korean font size on DC69-units is decreased to fix a bug where Korean characters were truncated.