SVX Wireless Systems deliver the quality of Shure wireless performance for virtually any application. From vocal performance to fitness instruction, presentations to karaoke, SVX Wireless will provide years of reliable use. No other wireless system combines the same level of quality and ease of setup in a single package.

Main Features

Main Features

  • Available Transmitter Form factors: Handheld, Bodypack

Sound Quality

  • New PG28 Mic head for Speech
  • Shure sound quality – PG58 for vocal

Set-Up features

  • Antenna diversity
  • 8 selectable channels
  • Adjustable Squelch
  • 1/4” output & XLR output
  • AA battery & PS 21 power supply
  • 2-position HI/LO Output Power Switch (Handheld)

Performance

  • Up to 16MHz Bandwidth (UHF)
  • Up to 4 compatible channels (country dependent)

Wireless Sets

Wireless Sets

Components

Components

Specs

Specs

Technical specifications

SVX Wireless Systems Specifications
SVX88 Specifications
Weight:
245 g
Height x Width x Depth:
32.0 × 168.0 × 104.5 mm
Transmission:
Analog
Bias via BNC:
No
High Density Mode:
No
Interference Detection:
No
Remote Control:
No
Number of compatible systems per frequency band:
Up to 4
DANTE-Enabled Products:
No
Detachable Antennas:
No
Logic:
No
Cascade:
No
Receiver type:
Dual
Line Mic Switch:
No
Image Rejection:
50 dB, typical
RF Sensitivity:
-105 dBm, for 12dB SINAD, typical
Phantom Power Protection:
No
SVX4 Specifications
Transmission:
Analog
Type of Power Supply:
External
Receiver Housings:
Molded ABS
Bias via BNC:
No
High Density Mode:
No
Interference Detection:
No
Remote Control:
No
Number of compatible systems per frequency band:
Up to 4
DANTE-Enabled Products:
No
Detachable Antennas:
No
Logic:
No
Cascade:
No
Receiver type:
Single
Line Mic Switch:
No
Power Requirements:
12 to 18 V DC @ 130 mA
Phantom Power Protection:
No
SVX2/PG58 Specifications
Weight:
270 g
Battery life alkaline:
10 h
Form Factor:
Handheld
Transmitter housings:
Molded ABS
Audio Mute:
No
Detachable Antennas:
No
Switchable RF power:
No
Frequency Diversity:
No
High Density Mode:
No
Input impedance:
22 kΩ
Transmission:
Analog
SVX2/PG28 Specifications
Weight:
270 g
Battery life alkaline:
10 h
Form Factor:
Handheld
Transmitter housings:
Molded ABS
Audio Mute:
No
Detachable Antennas:
No
Switchable RF power:
No
Batteries:
AA
Frequency Diversity:
No
High Density Mode:
No
Input impedance:
22 kΩ
Transmission:
Analog
SVX1 Specifications
Weight:
90 g
Battery life alkaline:
10 h
Form Factor:
Bodypack
Audio Mute:
No
Detachable Antennas:
No
Switchable RF power:
No
Bodypack HxWxD without antenna:
108x64x19 g
Frequency Diversity:
No
High Density Mode:
No
Transmission:
Analog
PGA58 Specifications
Weight:
294 g
Frequency Response:
50 Hz – 16 kHz
Frequency Response:
Tailored
Sensitivity:
-55.00 dBV/Pa – 1.79 mV/Pa
Transducer Type:
Dynamic
Polar Pattern:
Cardioid
Switchable low cut:
No
Connectors:
3 Pin XLR
Attenuator:
No
Interchangeable Capsule:
No
Main Functionality:
Performance
Headphone Output:
No
Cartridge:
Fixed
PGA31 Specifications
Weight:
60 g
Frequency Response:
60 Hz – 20 kHz
Frequency Response:
Tailored
Sensitivity:
-50.00 dBV/Pa – 3.20 mV/Pa
Equivalent Selfnoise:
28 dB(A)
Sound Pressure:
145 dB
Transducer Type:
Condenser
Polar Pattern:
Cardioid
Switchable low cut:
No
Connectors:
TQG (T4AF, 4-Pin Mini)
Attenuator:
No
Interchangeable Capsule:
No
Main Functionality:
Performance
Headphone Output:
No
Requires Phantom Power:
5V DC (nominal), 10 V maximum (DC bias) VDC
Cartridge:
Fixed
CVL Specifications
Weight:
25 g
Frequency Response:
60 Hz – 12 kHz
Frequency Response:
Tailored
Sensitivity:
-43.50 dBV/Pa – 6.70 mV/Pa
Equivalent Selfnoise:
22 dB(A)
Sound Pressure:
139 dB
Transducer Type:
Condenser
Polar Pattern:
Cardioid
Switchable low cut:
No
Connectors:
TQG (T4AF, 4-Pin Mini)
Attenuator:
No
Interchangeable Capsule:
No
Main Functionality:
Installed
Headphone Output:
No
Requires Phantom Power:
5 V DC (nominal), 10 V maximum (DC bias) VDC

Further Technical Specifications

Further Specs:

Working Range (Line of Sight)

  • HI power mode: 75 m (250 ft)
  • LO power mode: 18 m (60 ft)

Note: Actual range depends on RF signal absorption, reflection and interference.

Audio Frequency Response

  • 50 Hz to 15 kHz

Note: Dependent on microphone type

>Total Harmonic Distortion (Ref. ±48 kHz deviation, 1 kHz tone)

  • <1%

For J9 (New Zealand): Total Harmonic Distortion (Ref. ±26 kHz deviation, 1 kHz tone)

  • <1%

Dynamic Range

  • 90 dB A-weighted, typical

Operating Temperature Range

  • –10°C (14°F) to 50°C (122°F)

Note: Battery characteristics may limit this range. Transmitter Audio Polarity

Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output.

Downloads

Downloads

Comparable products

Comparable products