PGX Wireless Systems

PGX Wireless Microphone Systems combine superior wireless technology, automatic set-up features and legendary Shure microphones including the SM58 and BETA58A to deliver the best sounding easiest-to-use systems in their class.

System Configurations

Handheld Systems

PGX24/PG58

Complete wireless system including the entry level PG58 microphone

Guitar Systems

Instrument System Systems

PGX14/BETA98H

Complete wireless instrument system - including clip on instrument mic

Lavalier Systems

Headset Systems

Fast and easy setup, even for a beginner

Simply press the channel button on the front of the receiver and it will perform a quick scan of the area and select a clear frequency to avoid any unwanted interference. Once this is done, sync up the receiver with your transmitter by pressing the sync button on the receiver and pointing the infrared port on the transmitter at the receiver.

How many musicians can use this system simultaneously?

A maximum of 8 musicians can use PGX Wireless systems in parallel. One wireless system consists of one handheld transmitter and one receiver.

Is there a difference in sound quality between this system and a wired microphone?

The design goal of wireless microphone systems is that the user cannot differentiate between a wired or wireless mic. The PGX system uses our patented Audio Reference Companding which makes the system sound more like a wired microphone than ever before, with less noise and greater dynamic range than other wireless systems. No artifacts, lower noise floor and clearer sound at all levels.
 

  • 100 m (300 ft.) operating range
  • Multi-color LED indicating power, lockout, mute and low battery
  • The frequency Agile UHF design provides up to 90 selectable UHF frequencies that operate on an 18MHz UHF bandwidth
  • More than eight hours of continuous use with two AA batteries
  • Carrying case included in every system
  • Diversity Reception system uses twin receiver circuits to minimise noise and drop out caused by RF interference
  • Use up to 8 systems simultaneousy
  • PGX4 has has XLR and unbalanced 1/4 inch jack audio outputs

Receiver

Bodypacks

Transmitter

Headsets

PGA31

Wireless headset microphone for general use

Lavaliers

Band
From (MHz)
To (MHz)
Bandwidth (MHz)
Transmitter Output Power (mW)
Regions
 
 
 
 
PGX1
PGX2
 
G4CN
470.000
494.000
24
30
30
China
G8CN
494.000
510.000
16
30
30
China
H6
524.000
542.000
18
30
30
 New Zealand, ROA
J6
572.000
590.000
18
30
30
 ROA
L5
644.000
662.000
18
30
30
 Australia, ROA
L5CN
644.000
662.000
18
30
30
China
P6
702.000
720.000
18
30
30
 ROA
P6CN
702.000
720.000
18
30
30
China
Q8CN
740.000
752.000
12
10
10
China
R14
794.000
806.000
12
20
20
Taiwan, Thailand
R1
800.000
820.000
20
20
20
 ROA
JB
806.000
810.000
4
10
10
Japan
T1
846.000
865.000
19
10
10
ROA
X5
925.000
932.000
7
10
10
Korea

 

System technical specifications

  • Compatible systems per frequency band: 8
  • Auto Setup Features: Scan/Sync
  • Audio Reference Companding: Yes
  • Included Antennas: Attached 1/4-wave
  • Antenna Options: No
  • PC Control: No
  • Receiver Network Ability: No
  • Rack Hardware: Optional (URT)
  • Case: System Case
  • Transmitter Display: Multi-color LED
  • Receiver Display: Multi-color LED & channel display
  • Battery, Endurance: 2AA, >8 h
  • Environment: Small to medium stages, fitness centres, churches, small theatres, schools/lecture halls, karaoke

Further Technical Specs

PGX4 Receiver

Dimensions
40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)

Weight
327 g (11.5 oz.)

Housing
ABS

Audio Output Level (ref. +/– 33 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ω load): –19 dBV
1/4 inch connector (into 3000 Ω load): –5 dBV

Output Impedance
XLR connector: 200 Ω
1/4 inch connector: 1kΩ

XLR output
Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio

Sensitivity
–105 dBm for 12 dB SINAD, typical

Image Rejection
>70 dB, typical

Power Requirements
12–18 Vdc at 150 mA, supplied by external power supply

 

PGX1 Bodypack Transmitter

Audio Input Level
–10 dBV maximum at "mic" gain position
+10 dBV maximum at 0dB gain position
+20 dBV maximum at –10dB gain position

Gain Adjustment Range
30 dB

Input Impedance
1 MΩ

RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)

Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)

Weight
81 grams (3 oz.) without batteries

Housing
Molded polycarbonate case

Power Requirements
2 “AA” size alkaline or rechargeable batteries

Battery Life
>8 hours (alkaline)

 

PGX2 Handheld Transmitter

Audio Input Level
+2 dBV maximum at –10dB position
–8 dBV maximum at 0dB position

Gain Adjustment Range
10dB

RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)

Dimensions including SM58 cartridge
254 mm x 51 mm dia. (10 x 2 in.)

Weight
290 grams (10.2 oz.) without batteries

Housing
Molded PC/ABS handle and battery cup

Power Requirements
2 “AA” size alkaline or rechargeable batteries

Battery Life
>8 hours (alkaline)