PGX14 System
Read moreGo to the glossary receiver. Where to buy
Complete wireless guitar system - includes instrument cable
Add to comparison Go to comparisonWA302 Instrument Cable
- Instrument cable .75m
- 4-pin mini connector (TA4F) to 1/4-inch connector
- Can be used with all current Shure Transmitters
- UHF transmitter
- Can be used with Headworn, Lavalier, instrument Microphones, or guitars and basses.
- 3 position gain switch (mic, 0, -10)
- Includes a single power/mute switch
- LED indicator showing power, mute and battery status
- 8 hours of continuous use using 2 AA batteries (included)
- Operating range of 92m
- Compact and robust UHF receiver
- Easy to use, no prior wireless experience necessary
- Automatic frequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary selection with a touch of a button.
- Audio Reference CompandingAudio Reference Companding improves wireless sound quality by having a more efficient companding scheme. Read moreGo to the glossary for exceptional audio performance
- Microprocessor controlled diversityWireless “diversity” receivers feature two separate antennas for consistent signal reception.Read moreGo to the glossary
- ¼ wave antennas
- Description
- Features
- Specs
- Downloads
- Frequency Versions
- Software
Fast and easy setup, even for a beginner
Simply press the channel button on the front of the receiver and it will perform a quick scan of the area and select a clear frequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary to avoid any unwanted interference. Once this is done, sync up the receiver with your transmitter by pressing the sync button on the receiver and pointing the infrared port on the transmitter at the receiver.
How many musicians can use this system simultaneously?
A maximum of 8 musicians can use PGX Wireless systems in parallel. One wireless system consists of one bodypack transmitter and one receiver.
I normally plug my guitar straight in to my amp. Will the wireless affect the sound?
The PGX system uses Shure’s patented Audio Reference CompandingAudio Reference Companding improves wireless sound quality by having a more efficient companding scheme. Read moreGo to the glossary which makes the system sound just like a wired setup. With less noise and greater dynamic rangeThis is the difference between the queitest and loudest sound that a mic can pick up.Read moreGo to the glossary than other wireless systems. No artifacts lower noise floor and clearer sound at all levels.
- 92m operating range
- Multi-color LED indicating power, lockout, mute and low battery
- The frequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary Agile UHF design provides up to 90 selectable UHF frequencies that operate on an 18MHz UHF bandwidth
- More than eight hours of continuous use with two AA batteries
- Carrying case included in every system
- DiversityWireless “diversity” receivers feature two separate antennas for consistent signal reception.Read moreGo to the glossary Reception system uses twin receiver circuits to minimise noise and drop out caused by RF interference
- Use up to 8 systems simultaneousy
- PGX4 has has XLR and unbalanced 1/4 inch jack audio outputs
- PGX1 includes mute switch and battery power warning lights - 8 hours battery life from 2 x AA 1.5v alkaline batteries
System technical specifications
- Compatible systems per frequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary band: 8
- Selectable frequencies: 90
- Auto Setup Features: Scan/Sync
- Audio Reference CompandingAudio Reference Companding improves wireless sound quality by having a more efficient companding scheme. Read moreGo to the glossary: Yes
- Included Antennas: Attached 1/4-wave
- Antenna Options: No
- Receiver Network Ability: No
- PC Control: No
- Rack Hardware: Optional (URT)
- Case: System Case
- Transmitter Display: Multi-color LED
- Receiver Display: Multi-color LED
- Battery, Endurance: 2AA, >8 h
- Environment: Small to medium stages, fitness centres, churches, small theatres, schools/lecture halls, karaoke
Further Technical Specs
Working Range
100m (300 ft.)
Note: actual range depends on RF signal absorption,reflection, and interference
Audio Frequency Response
+/– 2 dB
Minimum: 45 Hz
Maximum: 15 kHz
(Overall system frequency depends on microphone element.
Total Harmonic Distortion
Ref. +/– 33 kHz deviation, 1 kHz tone
0.5%, typical
Dynamic Range
>100 dB A-weighted
Operating Temperature Range
–18°C (0°F) to +50°C (+122°F)
Note: battery characteristics may limit this range
Transmitter Audio Polarity
Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
PGX1 BodypackTransmitter
Audio Input Level
–10 dBV maximum at "mic" gain position
+10 dBV maximum at 0dB gain position
+20 dBV maximum at –10dB gain position
Gain Adjustment Range
30 dB
Input Impedance
1 MΩ
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight
81 grams (3 oz.) without batteries
Housing
Molded polycarbonate case
Power Requirements
2 “AA” size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
PGX2 Handheld Transmitter
Audio Input Level
+2 dBV maximum at –10dB position
–8 dBV maximum at 0dB position
Gain Adjustment Range
10dB
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions including SM58 cartridge
254 mm x 51 mm dia. (10 x 2 in.)
Weight
290 grams (10.2 oz.) without batteries
Housing
Molded PC/ABS handle and battery cup
Power Requirements
2 “AA” size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
PGX4 Receiver
Dimensions
40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
Weight
327 g (11.5 oz.)
Housing
ABS
Audio Output Level (ref. +/– 33 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ω load): –19 dBV
1/4 inch connector (into 3000 Ω load): –5 dBV
Output Impedance
XLR connector: 200 Ω
1/4 inch connector: 1kΩ
XLR output
Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
Sensitivity
–105 dBm for 12 dB SINAD, typical
Image Rejection
>70 dB, typical
Power Requirements
12–18 Vdc at 150 mA, supplied by external power supply
User Guides
| Band | From (MHz) | To (MHz) | Bandwidth (MHz) | Transmitter Output Power (mW) | Regions | |
| | | | | PGX1 | PGX2 | |
| G4CN | 470.000 | 494.000 | 24 | 30 | 30 | China |
| G8CN | 494.000 | 510.000 | 16 | 30 | 30 | China |
| H6 | 524.000 | 542.000 | 18 | 30 | 30 | US / CN / NZ / ROA |
| J6 | 572.000 | 590.000 | 18 | 30 | 30 | US / CN / ROA |
| L5 | 644.000 | 662.000 | 18 | 30 | 30 | US / CN / ROA |
| L5CN | 644.000 | 662.000 | 18 | 30 | 30 | China |
| P6 | 702.000 | 720.000 | 18 | 30 | 30 | EU / AUS/ ROA |
| P6CN | 702.000 | 720.000 | 18 | 30 | 30 | China |
| Q8 | 740.000 | 752.000 | 12 | 10 | 10 | Korea |
| Q8CN | 740.000 | 752.000 | 12 | 10 | 10 | China |
| R14 | 794.000 | 806.000 | 12 | 20 | 20 | CN / TH / TW |
| R1 | 800.000 | 820.000 | 20 | 20 | 20 | EU / CN / ROA |
| JB | 806.000 | 810.000 | 4 | 10 | 10 | Japan |
| T1 | 846.000 | 865.000 | 19 | 10 | 10 | EU / CN / ROA |
| X1 | 944.000 | 952.000 | 8 | 30 | 30 | US / CN |
| X5 | 925.000 | 932.000 | 7 | 10 | 10 | Korea |
