PG1288/PG30 Dual System
Read moreGo to the glossary receiver. Where to buy
Complete dual wireless system - including headset and handheld mic
Add to comparison Go to comparison
- Description
- Features
- Specs
- Downloads
Fast and easy setup, even for a beginner?
Simply press the channel button on the front of receiver and choose one of 10 available channels. A seven-segment LED indicates instantly if the selected channel is available. Once this is done, choose the same on the transmitter, and you are ready to go.
How many musicians can use this system simultaneously?
A maximum of four musicians can use Performance Gear Wireless systems in parallel. One wireless system consists of one bodypack transmitter and one receiver, so at a maximum you can run two dual receiver systems simultaneously.
Why internal antennas?
For ideal signal strength, antennas on a wireless system need to be setup in a certain way. The internal antennas on Performance Gear Wireless systems are already set in this ideal way, offering up to 75 m operating range and optimal signal strength.
Additionally internal antennas cannot be broken during setup, use or transport.
- Hassle free setup
- Internal antennas simplify operation and storage
- Only one channel select button
- A seven-segment LED indicated instantly if the selected channel is occupied
- Reliable wireless technology
- Microprocessor controlled Predictive DiversityWireless “diversity” receivers feature two separate antennas for consistent signal reception.Read moreGo to the glossary
- 10 selectable frequencies
- Up to 4 compatible systems per band
- Shure standard ruggedness
System technical specifications
- Compatible systems per frequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary band: 4
- Selectable frequencies: 10
- Auto Setup Features: No
- Audio Reference CompandingAudio Reference Companding improves wireless sound quality by having a more efficient companding scheme. Read moreGo to the glossary: No
- Included Antennas: Internal 1/4-wave
- Antenna Options: No
- Receiver Network Ability: No
- PC Control: No
- Rack Hardware: Optional (URT)
- Case: Optional System Case
- Transmitter Display: Multi-color LED
- Receiver Display: Multi-color LED
- Battery, Endurance: 9V, > 8 h
- Environment: Small to medium stages, schools, karaoke
Further Technical Specs
PG88 Dual Receiver
- Output Impedance XLR connector: 200 Ω 1/4 inch connector: 1kΩ
- Audio Output Level Ref.
- +/– 33 kHz deviation with
- 1 kHz tone
- XLR connector (into 100K Ω load): –19 dBV, typical
- 1/4 inch connector (into 100K Ω load): –5 dBV, typical
- Sensitivity –105 dBm for 12 dB SINAD, typical
- Image Rejection >50 dB, typical
- Dimensions 188 mm L x 103 mm W x 40 mm D (7.4 in. x 4.0 in. x 1.5 in.)
- Dimensions - PG88 388 mm L x 116 mm W x 40 mm D (15.3 in. x 4 in. x 1.5 in.)
- Weight 241 grams (8.5 oz)
- Weight - PG88 429 grams (15.1 oz)
- Housing Molded ABS
- Power Requirements 12–18 Vdc at 160 mA (PG4), 320mA (PG88), supplied by external power supply
PG1 Bodypack Transmitter
- Audio Input Level
- -10 dBV maximum at "mic" gain position
- +10 dBV maximum at 0dB gain position
- +20 dBV maximum at -10dB gain position
- Gain Adjustment Range 30 dB
- Input Impedance 1mΩ
- RF Transmitter Output 10 mW typical (dependent on applicable country regulations)
- Dimensions 110 mm H x 64 mm W x 21 mm D (4.3 x 2.5 x 0.8 in.)
- Weight 75 grams (2.6 oz.) without battery
- Housing Molded ABS
- Power Requirements One 9V alkaline or rechargeable battery
- Battery Life Up to 8 hours (alkaline)
PG2 Handheld Transmitter
- Audio Input Level
- +2 dBV maximum at -10dB position
- -8 dBV maximum at 0dB position
- Gain Adjustment Range 10dB
- RF Transmitter Output 10 mW typical (dependent on applicable country regulations)
- Dimensions 223.52 mm L x 53.34 mm Dia. (8.8 in. x 2.10 in.)
- Weight 218 grams (7.7 oz.) without battery
- Housing Molded ABS handle and battery cup
- Power Requirements One 9V alkaline or rechargeable battery
- Battery Life Up to 8 hours (alkaline)
