SVX Wireless Systems
Wireless for performers that manage their own sound.
- Handheld
- Lavalier
- Headset
Handheld systems
Headset systems
- Description
- System Features
- Components
- Downloads
- Frequency Versions
- Optional Accessories
- Specs
SVX Wireless Systems deliver the quality of Shure wireless performance for virtually any application. From vocal performance to fitness instruction, presentations to karaoke, SVX Wireless will provide years of reliable use. No other wireless system combines the same level of quality and ease of setup in a single package.
Sound Quality
- New PG28 Mic head for Speech
- Shure sound quality – PG58 for vocal
Set-Up features
- Antenna diversity
- 8 selectable channels
- Adjustable Squelch
- 1/4” output & XLR output
- AA battery & PS 21 power supply
- 2-position HI/LO Output Power Switch (Handheld)
Performance
- Up to 16MHz Bandwidth (UHF)
- Up to 4 compatible channels (country dependent)
Dual channel diversityWireless “diversity” receivers feature two separate antennas for consistent signal reception.
Read moreGo to the glossary receiver for use with Shure SVX Wireless systems.
| Band | From (MHz) | To (MHz) | Bandwidth (MHz) | Transmitter Output Power (mW) | Regions | |
| | | | | SVX1 | SVX2 | |
| J9 | 558.000 | 570.000 | 12 | 10mW | 1mW / 10mW | New Zealand |
| P12 | 698.000 | 710.000 | 12 | 10mW | 1mW / 10mW | ROA |
| P14 | 710.000 | 726.000 | 16 | 10mW | 1mW / 10mW | ROA |
| P16 | 726.000 | 742.000 | 16 | 10mW | 1mW / 10mW | ROA |
| Q16 | 742.000 | 758.000 | 16 | 10mW | 1mW / 10mW | ROA |
| Q18 | 758.000 | 774.000 | 16 | 10mW | 1mW / 10mW | ROA |
| R23 | 774.000 | 787.000 | 13 | 10mW | 1mW / 10mW | ROA |
| R25 | 794.000 | 806.000 | 12 | 10mW | 1mW / 10mW | ROA / Taiwan / Thailand |
| JB1 | 806.000 | 810.000 | 4 | 10mW | 1mW / 10mW | Japan |
| X9 | 925.000 | 932.000 | 7 | 10mW | 1mW / 10mW | Korea |
System technical specifications
- Compatible systems per frequencyThis is how many times a sound or radio wave oscillates in one second.
Read moreGo to the glossary band (up to): 4 - Selectable frequencies: 8
- Auto Setup Features: No
- Audio Reference CompandingAudio Reference Companding improves wireless sound quality by having a more efficient companding scheme.
Read moreGo to the glossary: No - Included Antennas: Internal 1/4-wave
- Antenna Options: No
- Receiver Network Ability: No
- PC Control: No
- Rack Hardware: Optional (WASRM for 2 single channel receivers, WADRM for dual channel receiver)
- Case: No
- Transmitter Display: LED
- Battery, Endurance: 2AA, >10h
- Environment: Small stage, karaoke, hotels, schools, restaurants
Further Technical Specs
Working Range (Line of Sight)
- HI power mode: 75 m (250 ft)
- LO power mode: 18 m (60 ft)
Note: Actual range depends on RF signal absorption, reflection and interference.
Audio Frequency ResponseThis is the range of frequencies, from the lowest to the highest, that a mic can pick up.
Read moreGo to the glossary
- 50 Hz to 15 kHz
Note: Dependent on microphone type
Total Harmonic DistortionTotal Harmonic Distortion is a measure of how much electrical noise a device produces.
Read moreGo to the glossary (Ref. ±48 kHz deviation, 1 kHz tone)
- <1%
For J9 (New Zealand): Total Harmonic DistortionTotal Harmonic Distortion is a measure of how much electrical noise a device produces.
Read moreGo to the glossary (Ref. ±26 kHz deviation, 1 kHz tone)
- <1%
Dynamic RangeThis is the difference between the queitest and loudest sound that a mic can pick up.
Read moreGo to the glossary
- 90 dB A-weighted, typical
Operating Temperature Range
- –10°C (14°F) to 50°C (122°F)
Note: Battery characteristics may limit this range. Transmitter Audio Polarity
Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output.