SM86 with ULX2 Handheld Transmitter
- Description
- Features
- Specs
- Downloads
The SM86 with the ULX2 transmitter features the SM86 cardioidPicks up most sound in front of the microphone and some from the sides. It is less susceptible to feedback in high volume environments.
Read moreGo to the glossary condenser microphoneCondenser microphones are more sensitive, give a smooth, natural sound and need to be powered.Read moreGo to the glossary head which is tailored for smooth, warm and rich vocal reproduction.
The ULX2 Wireless Handheld Transmitter offers advanced features and controls including a backlit LCD display showing group, channel and battery fuel guage. It also has frequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary and power lockout cabability and can be used continuously for up to 8 hours using 1 x 9v Battery (included).
This transmitter requires the ULXP4 receiver to complete the system.
All Shure wireless transmitter designs allow for interchangeable microphone heads
- 8-9 Hour Battery Life
- Power: On/Off Switch, Battery
- LED-Green When ON, Red When Battery Low
- Three-segment Battery Power Icon
- PEAK Icon-Appears When Audio Signal Overloads
- Group/Channel Displays
- SET Button for Saving Settings
- Adjustable Audio Gain Control
- Battery Cover Unscrews to Expose Battery and Gain Control
- 9V Battery Included
- Effective Range: 100 m (300 ft.) under optimal conditions
- Audio Frequency ResponseThis is the range of frequencies, from the lowest to the highest, that a mic can pick up.Read moreGo to the glossary: 25 to 15,000 Hz, ±2 dB
- Transmitter Gain Adjustment Range: 25 dB
- Receiver Audio Output Level (±38 kHz deviation, 1 kHz tone)
XLR connector (into 600 ohm load): +3.9 dBV (line), –17 dBV (mic)
1/4 inch connector (into 3000 ohm load): –2 dBV
- RF SensitivityThis is how mich signal a microphone produces for a given amount of sound.Read moreGo to the glossary: 1.26 μV for 12 dB SINAD (typical)
- Image Rejection: 80 dB typical
- Spurious Rejection: 75 dB typical
- Ultimate Quieting (reference ±38 kHz deviation) : >105 dB, A-weighted
- System Distortion (reference ±38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortionTotal Harmonic Distortion is a measure of how much electrical noise a device produces.
Read moreGo to the glossary, typical
- Power Requirements: 9V alkaline battery; 8.4 V Nicad optional
- Battery Life: 8 to 9 hours (with 9V alkaline battery)
- Operating Temperature Range: - 20° to 49° C (- 4° to 120° F)
- Overall Dimensions: 228.6 L x 51 mm
- Net Weight: 258 g
- RF Power Output: 30 mW maximum
- Dynamic RangeThis is the difference between the queitest and loudest sound that a mic can pick up.Read moreGo to the glossary: >100 dB, A-weighted
- RF SensitivityThis is how mich signal a microphone produces for a given amount of sound.
Other Head Options
