SLX4L Logic Receiver
- Description
- Features
- Specs
- Downloads
- Frequency Versions
The SLX4L wireless receiver offers unprecedented simplicity with features including Automatic FrequencyThis is how many times a sound or radio wave oscillates in one second.
Read moreGo to the glossary Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box. Other features include a backlit LCD screen which provides group, channel and antenna information. A five segment audio meter lets you monitor the incoming audio signal from the transmitter.
The SLX4L also includes logic output for use with software echo cancellation and remote battery life monitoring. Logic-enabled transmitters include MX690 and MX890.
- Automatic FrequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary Selection
- Automatic Transmitter Setup
- Detachable 1/4 wave antennas
- Microprocessor-controlled diversityWireless “diversity” receivers feature two separate antennas for consistent signal reception.Read moreGo to the glossary
- Multi-function, backlit LCD
- Low battery indicator
- Rugged metal chassis
- 1/2 rack design
- Power supply: PS21UK
- Battery status: Yes
- Further specs:
- Dimensions: 42 mm H x 197 mm W x 134 mm D
- Weight: 816 g
- Housing: Galvanized steel
- Audio Output Level : XLR connector (into 600 Ω load): –13 dBV, 1/4 inch connector (into 3000 Ω load): –2 dBV
- Output ImpedanceThis describes how resistant an electrical circuit is to the flow of electricity passing through it.Read moreGo to the glossary: XLR connector: 200 Ω, 1/4 inch connector: 1kΩ
- SensitivityThis is how mich signal a microphone produces for a given amount of sound.Read moreGo to the glossary: -105 dBm for 12 dB SINAD, typical
- Image Rejection: >70 dB, typical
- Operating Range Under Typical Conditions: 100m (300 ft.)
- Audio Frequency ResponseThis is the range of frequencies, from the lowest to the highest, that a mic can pick up.Read moreGo to the glossary (+/– 2 dB): Minimum: 45 Hz Maximum: 15 kHz
Logic Connections (SLX4L only)
- Pin 1: Logic output, Transmitter Mute Status. Mute=low (0 V). Sinks up to 100 mA.
- Pin 2: Logic ground
- Pin 3: Logic output, Battery Status. Good=low (0 V). Sinks up to 100 mA.
Absolute maximum -0.7 to 5.5V DC
Absolute maximum -0.7 to 5.5V DC
Frequency ranges and power output for the transmitters
| Band | Range | Power Output |
| J2 | 554-590 MHz | 30 mW |
| M2 | 662-698 MHz | 30 mW |
| Q2 | 748-784 MHz | 20 mW |
| R4 | 784-820 MHz | 20 mW |
| S3 | 829-865 MHz | 10 mW |
Please be aware of country-specific laws when operating on different frequency bands.
