PGX14 Wireless Guitar System

Complete wireless guitar system - includes instrument cable

Fast and easy setup, even for a beginner

Simply press the channel button on the front of the receiver and it will perform a quick scan of the area and select a clear frequency to avoid any unwanted interference. Once this is done, sync up the receiver with your transmitter by pressing the sync button on the receiver and pointing the infrared port on the transmitter at the receiver.

How many musicians can use this system simultaneously?

A maximum of 8 musicians can use PGX Wireless systems in parallel. One wireless system consists of one bodypack transmitter and one receiver.

I normally plug my guitar straight in to my amp. Will the wireless affect the sound?

The PGX system uses Shure’s patented Audio Reference Companding which makes the system sound just like a wired setup. With less noise and greater dynamic range than other wireless systems. No artifacts lower noise floor and clearer sound at all levels.


Components


Features

  • 92m operating range
  • Multi-color LED indicating power, lockout, mute and low battery
  • The frequency Agile UHF design provides up to 90 selectable UHF frequencies that operate on an 18MHz UHF bandwidth
  • More than eight hours of continuous use with two AA batteries
  • Carrying case included in every system
  • Diversity Reception system uses twin receiver circuits to minimise noise and drop out caused by RF interference
  • Use up to 8 systems simultaneousy
  • PGX4 has has XLR and unbalanced 1/4 inch jack audio outputs
  • PGX1 includes mute switch and battery power warning lights - 8 hours battery life from 2 x AA 1.5v alkaline batteries

 


Tech Specs

  • Compatible systems per frequency band: 8
  • Auto Setup Features: Scan/Sync
  • Audio Reference Companding: Yes
  • Included Antennas: Attached 1/4-wave
  • Antenna Options: No
  • PC Control: No
  • Receiver Network Ability: No
  • Rack Hardware: Optional (URT)
  • Case: System Case
  • Transmitter Display: Multi-color LED
  • Receiver Display: Multi-color LED & channel display
  • Battery, Endurance: 2AA, >8 h
  • Environment: Small to medium stages, fitness centres, churches, small theatres, schools/lecture halls, karaoke

Further Technical Specs

Working Range
100m (300 ft.)
Note: actual range depends on RF signal absorption,reflection, and interference

Audio Frequency Response
+/– 2 dB
Minimum: 45 Hz
Maximum: 15 kHz
(Overall system frequency depends on microphone element.

Total Harmonic Distortion
Ref. +/– 33 kHz deviation, 1 kHz tone
0.5%, typical

Dynamic Range
>100 dB A-weighted

Operating Temperature Range
–18°C (0°F) to +50°C (+122°F)
Note: battery characteristics may limit this range

Transmitter Audio Polarity
Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.

PGX1 BodypackTransmitter

Audio Input Level
–10 dBV maximum at "mic" gain position
+10 dBV maximum at 0dB gain position
+20 dBV maximum at –10dB gain position

Gain Adjustment Range
30 dB

Input Impedance
1 MΩ

RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)

Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)

Weight
81 grams (3 oz.) without batteries

Housing
Molded polycarbonate case

Power Requirements
2 “AA” size alkaline or rechargeable batteries

Battery Life
>8 hours (alkaline)

PGX2 Handheld Transmitter

Audio Input Level
+2 dBV maximum at –10dB position
–8 dBV maximum at 0dB position

Gain Adjustment Range
10dB

RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)

Dimensions including SM58 cartridge
254 mm x 51 mm dia. (10 x 2 in.)

Weight
290 grams (10.2 oz.) without batteries

Housing
Molded PC/ABS handle and battery cup

Power Requirements
2 “AA” size alkaline or rechargeable batteries

Battery Life
>8 hours (alkaline)

PGX4 Receiver

Dimensions
40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)

Weight
327 g (11.5 oz.)

Housing
ABS

Audio Output Level (ref. +/– 33 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ω load): –19 dBV
1/4 inch connector (into 3000 Ω load): –5 dBV

Output Impedance
XLR connector: 200 Ω
1/4 inch connector: 1kΩ

XLR output
Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio

Sensitivity
–105 dBm for 12 dB SINAD, typical

Image Rejection
>70 dB, typical

Power Requirements
12–18 Vdc at 150 mA, supplied by external power supply
 


Downloads

File
pgx_user_guide_EN PDF